Slip Yoke Eliminators

THE HOME OF THE TRULY HIGH ANGLE AND LONG TRAVEL DRIVE SHAFTS

When you order online or by phone, we guarantee that we will guide you if we see any problems with information you provided. You will get what you need.

Below you will find solutions to any problems you are having with drive shafts. We have manufactured a complete set of solutions so that there are very few if any problems you are having that we have not addressed.



SYE Kits                    LONG TRAVEL       ROVER, SUZUKI, TOY    BLAZERs + JEEPS+OTHERS    PERF 45    BBjr 60/Bad Boy80                                                 yokes            HI ANGLE LONG SPLINES



Blazers 1350         1350 32 spline     Universal 32 SPL Suzuki          HD Buggy Axles 930 hubs

CV 32 SPL 208TC 205,Atlas,All Kits Ford,Chvy,Dodg,Toy           Half ton/One ton long spline 35

TOP OF EACH WEB PAGE ARE THE SAME, SCROLL DOWN AFTER EACH PAGE FOR CONTENT

SHOPPING CART SPECIALS

                                A) NP231 SYE KIT start at $325 includes CV drive shaft.    Click & see

                         B) Heavy duty Short Shaft Kits With new shaft and housing etc... Click to see

                         C) 10% Off when you buy a stock drive shaft Online.

                         D) 930 Buggy axles Can not be beat !!!

CLICK BEST SELLER DRIVE SHAFT SHORTCUTS BELOW

You may cancel or delete selected items at any time before submitting a purchase

HOW TO MEASURE A DRIVE SHAFT

New Products / Wrangler Options / JK Jeep kit / CJ Drive Shafts / Chevy Rear Shaft / Chevy Frt

Chevy HD Drive Shafts /Toyota Frnt &Rear Shafts / Ford Super Duty/Dodge Drive Shafts

Ford-Chevy-Dodge-Jeep-Blazer SYEs / Chevy S10 Front / S10 Stock rear / S10 231 SYE

Bronco / Rubicon Shafts / Land Rover / Low Riders / Two CV Shafts / Long Travel / U-joints

Buggy Axles / SYE & Shaft / Tranny Yokes / Trans Case Yokes / Weld Yokes / Custom Flanges

Eliminate Slip Yoke/ Non-Serv Shafts / Hi Angle CV 40 deg Shafts / H Angle 50,60,80 CVs

Drive Shaft Parts /Stock Shafts / No CV Shafts / D300 CV Yokes / Dana20 CV Yokes / Long Spline

Link Trades : You verify our site and we check yours.

World Class Driveshafts
800-845-6326 602-253-8006 602-253-8208

ADDRESS

2417 WEST Lincoln St Phoenix AZ 85009

Eliminator Yokes Only

The fixed yoke provided eliminates your slip yoke. The purpose being to allow the installation of a CV which lowers the angle thus removing vibration due to the lift. Other advantages of these yokes are the addition of working travel to a telescopic drive shaft and if the drive shaft fails, you can drive home on the front without spilling the transfer case or tranny fluid.
IF YOU WANT COMPLETE KITS, SEE SYE WITH CV SHAFT OR THE HD 231/241 SHORT SHAFT KITS
NOTICE: MANY VEHICLES (CHEVY MAINLY) WITH A SLIP YOKE MAKE A CLUNK NOISE WHEN STOPPING AND YOU LET OFF THE BRAKE. ELIMINATE THAT FOR EVER WITH AN SYE FROM US. TAHOES, CHEVY P/Us, JUST ANYTHING WITH A SLIP YOKE. WE WILL MAKE YOU A YOKE TO BOLT TO THE TRANNY OR TRANSFER CASE OUTPUT SHAFT SO THAT THE SLIDING IS ELIMINATED FROM THE YOKE. WE WILL MAKE A DRIVE SHAFT TO GO WITH IT.
IF YOU DON'T FIND IT HERE CALL US AND MAKE A ORDER FOR WHAT YOU DO HAVE. WE MAKE THEM ALL.
WHENEVER POSSIBLE, IF YOU PROVIDE THE SPLINES (YOUR OLD YOKE) THE THE PRICE IS LOWERED TO $140 INSTEAD OF $165 OR $185

  We make Eliminator Yokes and for any other transfer cases. If you have a transmission slip yoke we can eliminate it!!!

Slip Yoke Eliminator for FORD
Borg Warner 1356 transfer case slip yoke eliminator. Bolt after drilling and tapping a hole at the of the output shaft. The flange front 31 spline flange.

Supports:

1350 CV 2 inch pilot SYE for Ford -- $185.00

1350 CV 2.688 inch pilot SYE for Ford -- $185.00

Slip Yoke Eliminator (SYE) Yoke
for the np241, np205, and np208 slip yoke type transfer cases

   This is a fully splined 1 7/8 inch seal surface diameter slip yoke only. You can bolt this one on after drilling and tapping a hole at the end of the output shaft.

   Any slip yoke transfer case can have an SYE made for it. This includes Dodges, Fords, Chevys,.. As long as it is a slip yoke, it can be eliminated.

   Size of CV needed on the SYE Yoke

FOR 208 SYE COMPLETE KIT CLICK HERE
This flange is 32 spline and is installed just like the yoke except that the purpose of a flange is to support the use of a one-ton (1350) CV or a Saginaw (GM) CV like from a front of a 77 and up Chevy pick-up or Blazer.

Large flange style 2.0 pilot SYE -- $185.00

Large flange style 2.688 pilot SYE -- $185.00

Wrangler 27 spline slip yoke eliminator CV style or U-joint style
Yoke only

These slip yoke eliminator Yokes are made custom and fit jeep 207, 242, 231 transfer cases and turbo 350 transmissions (for low rider fixed yokes when using our long slip shafts).

   This flange is 27 spline and is installed just like the yoke except that the purpose of a flange is to support the use of a one ton (1350) CV or a Saginaw (GM) CV like from a front of a 77 and up Chevy pick-up or Blazer.

1310 u-joint style Wrangler 27 spline yoke eliminator -- $165.00

1310 CV style Wrangler 27 spline SYE -- $100.00

1350 flange style Wrangler 27 spline SYE -- $185.00

ANY UJOINT OF OURS BREAKS WE REPLACE IT FREE OF CHARGE