World Class Driveshafts
SALES
and TECH HELP
800-845-6326 602-253-8006 602-253-8208
FAX
602-252-5638
Customer Service for order status and repairs 888-222-8610
ADDRESS
2417 WEST Lincoln St Phoenix AZ 85009
End Yokes for Transfer Cases and Differentials
NEW IN THE MARKET 1350 ONE TON CV STYLE YOKE 32 SPLINES FOR 205,203, ATLAS, RUBICON, 231SHORT SHAFT KITS, AND OTHERS
WE CAN PUT A ONE TON 1350 CV ON ANY TRANSFER CASE FRONT OR REAR.
1350 CV STYLE Yoke only Butt diameter 2.125 - $105
For Chevy Transfer 205
1350 CV STYLE Yoke 32 SPLINES Butt diameter 1.875 - $105
For Ford, Dodges, Atlas Transfer Cases, 231 Transfer Cases
NEW !!! U-BOLT STYLE DEEP THROAT HIGH ANGLE 1350 U-JOINTwFor Ford, Dodges, Atlas Transfer Cases, 231 Transfer Cases 2 1/8 SEAL SURFACE 32 SPLINES $105
NP205 transfer case yoke
32 spline rear yoke CV style with seal and smaller bolt supports
1350 U-bolt STYLE
1310 CV STYLE
1310 CV style NP205 32 spline transfer case yoke -- $65.00 1330 CV style NP205 32 spline transfer case yoke -- $85.00 1310 u-joint style NP205 32 spline transfer case yoke -- $45.00 1350 u-joint style NP205 32 spline transfer case yoke -- $105.00 1350 CV style NP205 32 spline transfer case yoke -- $105.00 1410 u-joint style NP205 32 spline transfer case yoke -- $120.00
**The price assumes that you will send your old yoke. If you don't have one or you don't want to, add $45 to the price below.
NP205 transfer case front yoke 10 spline
Major diameter 1.25” 1 3/4 SEAL SURFACE
THESE HAVE BEEN DISCONTINUED AND HARD TO FIND BUT WE CAN MAKE THEM
1310 NP205 32 spline transfer case front yoke CV style -- $165.00 ** 1310 u-joint style NP205 32 spline transfer case front yoke (obsolete but we have) -- 165.00 ** 1350 u-joint style NP205 32 spline transfer case front yoke -- $150 1410 u-joint style NP205 32 spline transfer case front yoke -- 175.00
DANA 20 transfer case 10 spline yoke
Major diameter is 1.125”
Dana 20 front/ rear 1410
Dana 20 10 spline yoke and flangeALL CUSTOM MADE
1310 CV style Dana 20 transfer case 10 spline yoke -- $95.00 1350 Dana 20 transfer case (custom made) 10 spline yoke -- $165.00 1410 Dana 20 transfer case (custom made) 10 spline yoke -- $165.00
DANA 300 Transfer case 26 Spline Yoke
1310 CV style1350 U-joint style
1310 CV style yoke Dana 300 26 spline yoke-- $65.00 1310 u-joint style Dana 300 26 spline yoke -- $50.00 1350 u-joint style Dana 300 26 spline yoke -- $110.00 1410 u-joint style Dana 300 yoke (custom made) -- $165.00 1350 Dana 300 flange 2 inch pilot flange -- $165.00
26 spline 1.547 ground-hub distance
1310
1310 Dana 30 pinion yoke -- $55.00 1350 Dana 30 pinion yoke -- $185.00 CUSTOM MADE 1410 Dana 30 pinion yoke -- $185.00 CUSTOM MADE
26 spline 1.844 ground-hub distance
1330
1310 Dana 35 pinion yoke -- $55.00 1330 Dana 35 pinion yoke -- $80.00 1350 Dana 35 Custom pinion yoke -- $185.00 CUSTOM MADE 1410 Dana 35 pinion yoke -- $185.00 CUSTOM MADE
Dana 44 Pinion Yoke
26 spline major diameter of 1.146 inches
1410
1310
1310 Dana 44 pinion yoke -- $65.00 1310 CV style Dana 44 pinion yoke -- $65.00 1350 Dana 44 pinion yoke -- $120.00 1410 Dana 44 pinion yoke -- $165.00 CUSTOM
Dana 44 pinion yoke
10 splines major diameter of 1.125 inches
1310 Dana 44 pinion u-joint style yoke 10 spline -- $65.00
DANA 60/70 Pinion Yoke 29 Spline Yoke
major diameter is 1.276”
1350
1410
U BOLT SYLES AVAILABLE.
1310 Dana 60/70 yoke u-joint style -- $60.00 1350 Dana 60/70 yoke u-joint style -- $95.00 U-BOLT SYLE 1410 Dana 60/70 yoke u-joint style-- $120.00 Flange 29 spline for Dana 60/70 -- $165.00 CUSTOM
Corporate 14 Bolt
30 spline yoke for 9.5 1350 1 TON and 10.5 1350 AND 1410 u-joint sizes,
1350 style Corporate 9.5 14 bolt SMALLER PINION -- $95.00 1350 Corporate 14 bolt 10.5 LARGE PINION -- $105.00 1410 Corporate 14 bolt 10.5 LARGE PINION -- $125.00 Corporate 12 bolt 3/4 ton 30 splines yoke
For 8.8 Major diameter is 1.29” Billet
1350 u-bolt style Corporate 12 bolt yoke -- $110.00
Corporate 10 bolt 1/2-ton 30 spline yoke
For 8.5, 3R inside clip, major diameter 1.312”
3R u-joint Corporate 10 bolt yoke -- $75.00 1350 Corporate 10 bolt yoke -- $90.00
9 inch Ford 28 splines
major diameter is 1.218"
1310 9 inch Ford 28 spline -- $75.00 1350 9 inch Ford 28 spline -- $95.00
9 inch Ford 35 spline
major diameter is 1.515 Billet
1350 9-inch Ford 35 spline -- $175.00
