THE HOME OF THE TRULY HIGH ANGLE AND LONG TRAVEL DRIVE SHAFTS
 

When you order online or by phone, we guarantee that we will guide you if we see any problems with information you provided. You will get what you need.

 

Below you will find solutions to any problems you are having with drive shafts. We have manufactured a complete set of solutions so that there are very few if any problems you are having that we have not addressed.

                

 SYE  Kits                    LONG TRAVEL        ROVER, SUZUKI, TOY     BLAZERs + JEEPS+OTHERS    PERF 45     BBjr 60/Bad Boy80                                                 yokes            HI ANGLE LONG SPLINES

                         

Blazers 1350         1350 32 spline     Universal  32 SPL Suzuki          HD Buggy Axles 930 hubs         

CV 32 SPL 208TC  205,Atlas,All Kits   Ford,Chvy,Dodg,Toy           Half ton/One ton long spline 35

 

 

TOP OF EACH WEB PAGE ARE THE SAME, SCROLL DOWN AFTER EACH PAGE FOR CONTENT

 

 

SHOPPING CART SPECIALS

                                 A)  NP231 SYE KIT start at $325 includes CV drive shaft.    Click & see

                         B)  Heavy duty Short Shaft Kits With new shaft and housing etc... Click to see

                         C) 10% Off when you buy a stock drive shaft  Online.

                         D)  930 Buggy axles  Can not be beat !!!

 

 

CLICK BEST SELLER DRIVE SHAFT SHORTCUTS BELOW

 

 

 

You may cancel or delete selected items at any time before submitting a purchase

HOW TO MEASURE A DRIVE SHAFT

New Products / Wrangler Options / JK Jeep kit / CJ Drive Shafts / Chevy Rear Shaft / Chevy Frt

Chevy HD Drive Shafts /Toyota Frnt &Rear Shafts / Ford Super Duty/Dodge Drive Shafts

  Ford-Chevy-Dodge-Jeep-Blazer SYEs  / Chevy S10 Front / S10 Stock rear / S10 231 SYE

 Bronco / Rubicon Shafts / Land Rover / Low Riders / Two CV Shafts / Long Travel / U-joints

 Buggy Axles / SYE & Shaft / Tranny Yokes / Trans Case Yokes / Weld Yokes Custom Flanges

 Eliminate Slip Yoke/ Non-Serv Shafts / Hi Angle CV 40 deg Shafts / H Angle 50,60,80 CVs

Drive Shaft Parts /Stock Shafts / No CV Shafts / D300 CV Yokes / Dana20 CV Yokes / Long Spline

Catalogue

Customer Service

Contact Us

About Us

4x4 Links

4x4 Gallery

4x4 Videos

4x4 Babes

 

 

Link Trades : You verify our site and we check yours.

World Class Driveshafts
800-845-6326 602-253-8006 602-253-8208

ADDRESS       

2417 WEST Lincoln St Phoenix AZ 85009

 

Low Rider Shafts

 
Two-Piece or one-Piece
Standard Spline or Long Spline
for Lots of Travel

Also, Heavy Duty Solid Aluminum Carrier Bearing
or a Standard Carrier Bearing


A standard slip is added to the rear piece to extend and contract

Or You can have just the rear Part with a slip and you put it on

 

 


A super heavy duty carrier bearing that will not allow lateral movement
or the bearing to mis-placed


A CV can be used for angle up to 80 degrees depending on what CV is used.
This dr1ve shaft with long slip can be adapted to the rear part of the
two-piece drive shaft. Or make a single long piece.

ECONOMY  rear part of the two piece or a one piece drive shaft for shafts less than 60 inches. I

This drive shaft slip yoke allows the differential to move and does not push carrier bearing back and forth. Just specify the center to center of u-joints.

Less than 60"   ---  $190

Greater than 60"   ---  $210

This drive shaft can be specified to go on the rear part of a two piece with half ton U-joints or can be specified to be a stand alone one piece from the tranny to the pinion yoke.

Call us with the length. Dealer call for quantity pricing. The angle of the slip yoke ujoint is 30 degrees and can be more.

 

MORE SPECIAL SHAFTS WITH LONG TRAVEL DOUBLE CARDAN CVs TO MAKE BIGGER ANGLES AND HAVE LOTS OF TRAVEL.

 
Two-piece with standard slip and standard carrier bearing -- $250.00
Two-piece with 9 inch of slip -- $295.00
Two-piece with 12 inch of slip -- $350.00
Add a CV to any two-piece add this amount -- $185.00
One-piece with standard slip one piece or just the rear part  -- $185.00
One-piece with 9 inch of slip just the rear part -- $275.00
One-piece with 12 inch of slip one piece or just the rear part -- $350.00
Add a CV to any one-piece add this amount -- $185.00
 

ANY UJOINT OF OURS BREAKS WE REPLACE IT FREE OF CHARGE